TL3256 Controller

• Channels: 16 or 32

• Operating Modes: 16 Channels x 2 Scenes; 32 Channels x 1 Scene; 16 Channels and 16 Recorded Scenes

• Scene Memory: 128 Scenes (8 Banks of 16 Scenes)

• Scene Cue: 255 Scene Cue List with Programmable Fade In/Out times

• Chase: 16 Programmable 32 Step Chases for Channels, Scenes, or both

• Control Protocol: Microphone Cable Multiplexing and DMX-512

• Compatibility: Multiplex Protocol Compatible with other 3 wire multiplexed

• systems/NSI/Sunn

• Dimmer Assignment: 256 Dimmer soft-patch

• Patch Memory: 2 independent configurations

• Power Input: 120 VAC

• Power Consumption: 120 ma

RM121 Rack Mounted Dimmers

• Channels: 12

• Load Capacity: 1,200 W per channel; 14,400 W total

• Power Requirements: 240 VAC 50/60 Hz Single/Three Phase Dual Hot Inputs - 120 Amp Full Load

• Power Connector: Terminal Block

• Channel Output: Terminal Block

• Preheat Voltage: 8.5 VAC Self-adjusting

• Minimum Load: 15 W

• Circuit Breakers: Fast Acting 10 Amp Magnetic

• Curve: Modified Square Law

• Filter Rise Time: 350 Microseconds

• Filter Max Rate of Rise: 105 Milliamps/Microsecond

• Response Time: 8 Milliseconds

• Temperature Rise: 38° C under full load

• Full Load Voltage Drop: 3.6V

• Conduction Angle Range: 0-180°

• Efficiency: 97%

Dimmers & Switch Paks
ND46 / AS40

Channels: ND46 - 4 non-dimming
                 AS40 - 4 dimming

• Load Capacity: 600 W per channel / 2400 W total
• Control Protocol: Lightronics and other 3 wire multiplex/NSI/Sunn
• Control Connector: 3 Pin microphone (XLR) connector
• Power Requirements: 120 VAC, 50/60 Hz, 20 Amp full load
• Power Connector: 20 Amp parallel blade inlet
• Channel Output: Parallel Blade Outlet
• External Fuses: 5 Amp each channel
• Response Time: 17 Milliseconds
• Full Load Voltage Drop: 3 volts
• Efficiency: 97.5%

Dimmers & Switch Paks High Power
AS41 / AS412

• Channels: 4
• Load Capacity: 1,200 W per channel / 2400 W total for AS41, 4800 W total for AS412
• Control Protocol: Lightronics and other 3 wire multiplex/NSI/Sunn
• Control Connector: 3 Pin microphone (XLR) connector
• Power Requirements: 120 VAC, 50/60 Hz, 20 Amp full load (AS412 - 40 Amp full load)
• Power Connector: AS41 - 20 Amp parallel blade inlet

• AS412 Dual 20 Amp power cords
  

• Channel Output: Parallel Blade Outlet
• External Fuses: 10 Amp each channel
• Response Time: 17 Milliseconds
• Full Load Voltage Drop: 3 volts
• Efficiency: 97.5%

Contact Us Today, So We Can Start To Serve You Sooner!

Edmonton, AB  (780) 471-2001
Calgary, AB (403) 243-5200
Kelowna, BC (250) 717-1765

Webmaster

Last Updated: April 20, 1999

©1998 Axe Music Inc.

Total Hits since February 1, 1998